TEC1-12706 - Thermoelectric Peltier cooler module chip - 12V 6A 60W

Description

TEC1-12706 - Peltier 40x40mm chip
Not all 12706's are made the same - and if you have bought them from different factories, quickly you will begin to notice differences. From poor surface quality to random fails, to performance that just isn't quite right. At Cold & Colder, we do not cut corners with our Peltiers. We don't simply sell product; we use these chips for our own clients on a daily basis, and are passing on the opportunity to have the best quality 12706 on to you. It is unlikely that you will come across a finer 12706 than this one. Latest manufacturing equipment and stringent quality control results in a far more reliable, resilient module for your cooling needs.
Thermoelectric modules are magical devices that create a dramatic temperature differential between the two sides of their ceramic plates when electric current is applied. This is the most popular, low-cost Peltier chip.
If you are looking for more power in the same footprint, I recommend you
check out our TEC1-12715 as well (click).
We sell 40*40mm
Indium thermal interface pads that fit these perfectly, available here (click).
You can always run these at lower voltages for higher efficiency - as the current decreases, the coefficient of performance increases. At 12 volts the ΔT is almost 60°C. As you decrease the voltage and current draw, ΔT will decrease, but even at 1 volt there is a noticeable temperature difference, accompanied by the most efficient heat pumping you will find for this price.
Take your temperature control needs to a new level with solid-state.
These solid state devices are finding their ways into many creative applications. At Cold&Colder, we use them for custom-built server cabinet cooling. Since we use them ourselves, we can offer you advice on your application needs. Any questions are welcome. Bulk orders welcome, we have over 12,000 pcs in stock.