-40%
March Pump Assy 893-04 12VDC Submersible Model# 0893-0001-0400 “NEW” Made In USA
March Pump Assy 893-04 12VDC Submersible Model# 0893-0001-0400 “NEW” Made In USA
March Pump Assy 893-04 12VDC Submersible Model# 0893-0001-0400 “NEW” Made In USA

March Pump Assy 893-04 12VDC Submersible Model# 0893-0001-0400 “NEW” Made In USA

$ 92.4

Availability: 23 in stock
  • Condition: New – Open box
  • Custom Bundle: No
  • Brand: March Pumps
  • Inlet Diameter: 3/8 in (10 mm)
  • Supply Voltage: 12 V
  • Outlet Diameter: 3/8 in (10 mm)
  • Country/Region of Manufacture: United States
  • MPN: 893-04
  • Rated Power: 1/150
  • Type: Magnetic Drive Pump

    Description

    March Pump Assy 893-04 12VDC Submersible Model# 0893-0001-0400 “NEW”.
    Series 893
    Liters per minute (LPM) and Meters (M) are given when run at 50HZ, except when pump is equipped with Air or DC motors.
    893-04 Brush 12V 1 AMP DC
    March Pump's industrial 893-04 is an American submersible seal-less centrifugal magnetic drive pump ideal for applications such as marine equipment. It is capable of generating a maximum flow of 2.7 gallons per minute at 1 foot, and its maximum head is 10.6 Feet (or around 4.5PSI). The 893-04 must be used submerged. The standard wet end (the materials that come into contact with the solution) is composed of Noryl, Nylon, Carbon/Teflon, Buna N, Stainless Steel, and Ceramic Magnet. When submerged Epoxy, Delrin, and the motor leads are also in contact with the solution. The inlet connection is 0.375 inch female pipe thread, and the outlet is 0.375 inch smooth. The standard motor is a 0.006 Horsepower DC Brushtype Motor, available in 12 Volts. The 12 Volt Motor has an operating range from 0 to 14 Volts. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 160 Fahrenheit or 71 Celsius. The March 893-04 centrifugal magnetic drive pump is capable of handling mild corrosive chemicals, acids, and solvents. To determine if the March 893-04 is suitable for your application, please contact March Pump.
    Options
    O-Ring: Buna N, Viton, Teflon, or Ethylene Propylene
    Shaft: Ceramic or Stainless Steel
    Perfect for Applications Including
    Applications for the 893-04 Magnetic Drive Pump include marine equipment and water displays.
    March orbital magnetic Drive pumps eliminate the conventional shaft seals found in most pumps. This means that there is no rotating seal to wear and allow the liquid being pumped to leak out.
    All these pumps can be serviced with the use of a screwdriver. The only moving part in the pump other than the motor is the Impeller-Magnet assembly.
    This is a discontinued item, it was acquired at a business selling it’s items.