Coherent Duo FAP Dual Fiber Optic Diode Laser System 30W & 10W 630-1000 nm

Description

Coherent Duo FAP Dual Fiber Optic Diode Laser System 30W & 10W 630-1000 nm. Condition is "Used".
Optical
CW Output power:1 60 Watts (44 Watts @ 940 nm and 980 nm)
Center Wavelength(5): 785 to 820 nm, (940 nm, and 980 nm)
Spectral Width: <3 nm
Beam Divergence(2): <0.20 N.A.
Beam Diameter: 2x800 µm or 1x1700 µm fiber bundle
Noise(3): 1% rms
Power Stability(1): ±5%
Optical Fiber Delivery Type: 5-meter long, armored jacketed
Optical Fiber Delivery Termination: SMA 905
Diode Laser Control
Operating Temperature(4): 10°C to 35°C
Operating Modes:
cw
Single Shot
Repetitively Pulsed
External Analog Input
Operating Current: <60 A
Pulse Rise/Fall Time: <60 µS
Minimum/Maximum Pulse Width: 100 µS/3600 Second
Pulse Frequency: 0.3 mHz to 10 kHz
External Analog Input:
Input: 0 to 6V
Transfer Function: 10 A/V
Bandwidth: 1 kHz
Maximum Slew Rate: 0.1 A/µS
System Specifications
Input Devices:
RS-232
Analog Voltage
External Trigger
Foot Pedal (not includedl)
Operating Temperature(4): 0˚C to 40˚C
Cooling Requirements(6): Internal Fan
Operating Humidity: 5 to 95%, non-condensing
Storage Temperature: -20°C to 65°C
Electrical Specifications
Operating Voltage:
100/115/220 VAC ±10%
50/60 Hz
Power Consumption: <1200W (500W typical)
Mechanical Specifications
Weight: 27 kg (66 lb)
1Measured over 8 hours over the specified operating temperature range.
2The numerical aperture of the output beam is defined as the sine of the half-angle of the divergence cone that encircles 90% of the energy.
3Measured from 10 Hz to 1 GHz in cw operation, at power well above threshold.
4At ambient temperatures above 30°C the system will automatically shut off.
5Other wavelengths are available upon request. Consult your Coherent representative for other available options.
610 cm clearance required.